Quantcast
Channel: ROS Answers: Open Source Q&A Forum - RSS feed
Viewing all articles
Browse latest Browse all 475

rosbag exits recording abruptly after maximum file size is reached

$
0
0
I'm running `octomap_mapping` on my robot, and also want to record data for post processing. The data mostly includes `/tf` messages and `/pointCloud2` data. I running my code on a real robot, so I do wireless ssh into the robot and then record the data on my remote machine. In the middle of recording, rosbag exits after recording 167Mb data and prints "Killed" and exit, leaving a .active file. I have not had this issue before (when I run rosbag on the same computer as running ROS), I was wondering if this is happening because I'm recording data on a remote machine rather than the computer on the robot. Can someone confirm this theory and suggest a solution? Here's a link to someone else having similar issues: [http://ros-users.122217.n3.nabble.com/rosbag-exits-abnormally-td3637291.html](http://ros-users.122217.n3.nabble.com/rosbag-exits-abnormally-td3637291.html) **Edit**: Here is the actual output from remote machine running rosbag command over ssh. This time it didn't crap out at 167Mb, 13Mb instead. I think 167Mb is not even a significant number as this may be just a chunk of data it was trying to store before it exited. terminate called after throwing an instance of 'rosbag::BagIOException' what(): Error writing to file: writing 13571512 bytes, wrote 7480895 bytes Also, here is the kernel log: [13694.190638] wlan0: deauthenticating from d8:67:d9:c2:d0:a0 by local choice (reason=3) [13694.207447] cfg80211: Calling CRDA to update world regulatory domain [13694.216192] cfg80211: World regulatory domain updated: [13694.216198] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [13694.216202] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13694.216205] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13694.216208] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [13694.216211] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13694.216213] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13695.752099] PM: Syncing filesystems ... done. [13695.982204] PM: Preparing system for mem sleep [13697.548484] Freezing user space processes ... (elapsed 0.002 seconds) done. [13697.550530] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [13697.551847] PM: Entering mem sleep [13697.552000] Suspending console(s) (use no_console_suspend to debug) [13697.552241] sd 0:0:0:0: [sda] Synchronizing SCSI cache [13697.552364] sd 0:0:0:0: [sda] Stopping disk [13698.153598] [drm] Disabling audio 0 support [13698.548633] PM: suspend of devices complete after 995.697 msecs [13698.548815] PM: late suspend of devices complete after 0.179 msecs [13698.564658] pcieport 0000:00:04.0: System wakeup enabled by ACPI [13698.596559] ehci-pci 0000:00:12.2: System wakeup enabled by ACPI [13698.612545] ohci-pci 0000:00:12.0: System wakeup enabled by ACPI [13698.612632] PM: noirq suspend of devices complete after 63.761 msecs [13698.612680] ACPI: Preparing to enter system sleep state S3 [13698.624727] PM: Saving platform NVS memory [13698.628027] Disabling non-boot CPUs ... [13698.628477] Broke affinity for irq 17 [13698.629498] kvm: disabling virtualization on CPU1 [13698.732585] smpboot: CPU 1 is now offline [13698.734239] kvm: disabling virtualization on CPU2 [13698.836674] smpboot: CPU 2 is now offline [13698.837263] Broke affinity for irq 43 [13698.838272] kvm: disabling virtualization on CPU3 [13698.940752] smpboot: CPU 3 is now offline [13698.941416] ACPI: Low-level resume complete [13698.941455] PM: Restoring platform NVS memory [13698.943072] LVT offset 1 assigned for vector 0x400 [13698.943080] IBS: LVT offset 1 assigned [13698.943155] Enabling non-boot CPUs ... [13698.943190] x86: Booting SMP configuration: [13698.943191] smpboot: Booting Node 0 Processor 1 APIC 0x1 [13698.953169] Initializing CPU#1 [13698.954160] kvm: enabling virtualization on CPU1 [13698.956337] process: Switch to broadcast mode on CPU1 [13698.956501] CPU1 is up [13698.956515] smpboot: Booting Node 0 Processor 2 APIC 0x2 [13698.966489] Initializing CPU#2 [13698.967480] kvm: enabling virtualization on CPU2 [13698.969646] process: Switch to broadcast mode on CPU2 [13698.969768] CPU2 is up [13698.969781] smpboot: Booting Node 0 Processor 3 APIC 0x3 [13698.979755] Initializing CPU#3 [13698.980746] kvm: enabling virtualization on CPU3 [13698.982946] process: Switch to broadcast mode on CPU3 [13698.983081] CPU3 is up [13698.984375] ACPI: Waking up from system sleep state S3 [13698.984833] ohci-pci 0000:00:12.0: System wakeup disabled by ACPI [13698.998808] ehci-pci 0000:00:12.2: System wakeup disabled by ACPI [13699.094971] PM: noirq resume of devices complete after 110.227 msecs [13699.095096] PM: early resume of devices complete after 0.100 msecs [13699.096306] ath: phy0: ASPM enabled: 0x42 [13699.098431] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [13699.098864] pcieport 0000:00:04.0: System wakeup disabled by ACPI [13699.099724] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [13699.143723] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000). [13699.143816] radeon 0000:01:00.0: WB enabled [13699.143819] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffd54c00 [13699.143821] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffd54c0c [13699.145264] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xf90b2118 [13699.161560] [drm] ring test on 0 succeeded in 2 usecs [13699.161626] [drm] ring test on 3 succeeded in 1 usecs [13699.294993] usb 2-1: reset high-speed USB device number 2 using ehci-pci [13699.348119] [drm] ring test on 5 succeeded in 2 usecs [13699.348126] [drm] UVD initialized successfully. [13699.348127] [drm] Enabling audio 0 support [13699.348205] HDMI ATI/AMD: no speaker allocation for ELD [13699.348217] [drm] ib test on ring 0 succeeded in 0 usecs [13699.348296] [drm] ib test on ring 3 succeeded in 1 usecs [13699.500173] [drm] ib test on ring 5 succeeded [13699.591259] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [13699.595455] ata2.00: configured for UDMA/100 [13699.647347] HDMI ATI/AMD: no speaker allocation for ELD [13699.947597] HDMI ATI/AMD: no speaker allocation for ELD [13700.247838] HDMI ATI/AMD: no speaker allocation for ELD [13700.548079] HDMI ATI/AMD: no speaker allocation for ELD [13700.720150] psmouse serio1: elantech: retrying ps2 command 0xe6 (2). [13700.848329] HDMI ATI/AMD: no speaker allocation for ELD [13701.148571] HDMI ATI/AMD: no speaker allocation for ELD [13701.234167] psmouse serio1: elantech: retrying ps2 command 0xf8 (2). [13701.272622] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [13701.282584] ata1.00: configured for UDMA/133 [13701.296711] sd 0:0:0:0: [sda] Starting disk [13701.336912] PM: resume of devices complete after 2239.987 msecs [13701.337122] PM: Finishing wakeup. [13701.337124] Restarting tasks ... done. [13701.448818] HDMI ATI/AMD: no speaker allocation for ELD [13701.749079] HDMI ATI/AMD: no speaker allocation for ELD [13701.781237] video LNXVIDEO:01: Restoring backlight state [13701.937270] psmouse serio1: elantech: retrying ps2 command 0xf8 (1). [13702.118638] tg3 0000:02:00.0: irq 46 for MSI/MSI-X [13702.129732] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [13702.174361] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [13703.100176] wlan0: authenticate with 80:1f:02:d4:b5:44 [13703.119419] wlan0: send auth to 80:1f:02:d4:b5:44 (try 1/3) [13703.121364] wlan0: authenticated [13703.122077] wlan0: associate with 80:1f:02:d4:b5:44 (try 1/3) [13703.138624] wlan0: RX AssocResp from 80:1f:02:d4:b5:44 (capab=0x411 status=0 aid=4) [13703.138683] wlan0: associated [13703.138727] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [16080.871636] cfg80211: Calling CRDA to update world regulatory domain [16080.881217] cfg80211: World regulatory domain updated: [16080.881222] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [16080.881225] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16080.881228] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16080.881230] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [16080.881232] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16080.881234] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16081.799974] wlan0: authenticate with 80:1f:02:d4:b5:44 [16081.826605] wlan0: send auth to 80:1f:02:d4:b5:44 (try 1/3) [16081.828658] wlan0: authenticated [16081.830578] wlan0: associate with 80:1f:02:d4:b5:44 (try 1/3) [16081.847145] wlan0: RX AssocResp from 80:1f:02:d4:b5:44 (capab=0x411 status=0 aid=4) [16081.847234] wlan0: associated [16810.385376] wlan0: deauthenticating from 80:1f:02:d4:b5:44 by local choice (reason=3) [16810.398778] cfg80211: Calling CRDA to update world regulatory domain [16810.405462] cfg80211: World regulatory domain updated: [16810.405468] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [16810.405471] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16810.405473] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16810.405475] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [16810.405477] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16810.405479] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16813.332870] PM: Syncing filesystems ... done. [16813.542431] PM: Preparing system for mem sleep [16813.968246] Freezing user space processes ... (elapsed 0.002 seconds) done. [16813.970383] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [16813.971685] PM: Entering mem sleep [16813.971838] Suspending console(s) (use no_console_suspend to debug) [16813.972084] sd 0:0:0:0: [sda] Synchronizing SCSI cache [16813.972207] sd 0:0:0:0: [sda] Stopping disk [16814.534973] [drm] Disabling audio 0 support [16814.878899] PM: suspend of devices complete after 906.198 msecs [16814.879079] PM: late suspend of devices complete after 0.177 msecs [16814.894785] pcieport 0000:00:04.0: System wakeup enabled by ACPI [16814.926798] ehci-pci 0000:00:12.2: System wakeup enabled by ACPI [16814.942812] ohci-pci 0000:00:12.0: System wakeup enabled by ACPI [16814.942897] PM: noirq suspend of devices complete after 63.762 msecs [16814.942943] ACPI: Preparing to enter system sleep state S3 [16814.962892] PM: Saving platform NVS memory [16814.966252] Disabling non-boot CPUs ... [16814.967586] kvm: disabling virtualization on CPU1 [16814.967612] smpboot: CPU 1 is now offline [16814.968117] Broke affinity for irq 17 [16814.969139] kvm: disabling virtualization on CPU2 [16815.070826] smpboot: CPU 2 is now offline [16815.072326] kvm: disabling virtualization on CPU3 [16815.174903] smpboot: CPU 3 is now offline [16815.175502] ACPI: Low-level resume complete [16815.175541] PM: Restoring platform NVS memory [16815.177180] LVT offset 1 assigned for vector 0x400 [16815.177187] IBS: LVT offset 1 assigned [16815.177243] Enabling non-boot CPUs ... [16815.177278] x86: Booting SMP configuration: [16815.177280] smpboot: Booting Node 0 Processor 1 APIC 0x1 [16815.187258] Initializing CPU#1 [16815.188249] kvm: enabling virtualization on CPU1 [16815.190435] process: Switch to broadcast mode on CPU1 [16815.190603] CPU1 is up [16815.190617] smpboot: Booting Node 0 Processor 2 APIC 0x2 [16815.200591] Initializing CPU#2 [16815.201582] kvm: enabling virtualization on CPU2 [16815.203747] process: Switch to broadcast mode on CPU2 [16815.203866] CPU2 is up [16815.203878] smpboot: Booting Node 0 Processor 3 APIC 0x3 [16815.213852] Initializing CPU#3 [16815.214844] kvm: enabling virtualization on CPU3 [16815.217014] process: Switch to broadcast mode on CPU3 [16815.217139] CPU3 is up [16815.218442] ACPI: Waking up from system sleep state S3 [16815.218900] ohci-pci 0000:00:12.0: System wakeup disabled by ACPI [16815.233003] ehci-pci 0000:00:12.2: System wakeup disabled by ACPI [16815.329171] PM: noirq resume of devices complete after 110.359 msecs [16815.329295] PM: early resume of devices complete after 0.099 msecs [16815.332649] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [16815.333029] pcieport 0000:00:04.0: System wakeup disabled by ACPI [16815.333155] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [16815.334093] ath: phy0: ASPM enabled: 0x42 [16815.338809] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000). [16815.338902] radeon 0000:01:00.0: WB enabled [16815.338905] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffd54c00 [16815.338907] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffd54c0c [16815.340350] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xf90b2118 [16815.356647] [drm] ring test on 0 succeeded in 2 usecs [16815.356713] [drm] ring test on 3 succeeded in 1 usecs [16815.525208] usb 2-1: reset high-speed USB device number 2 using ehci-pci [16815.543206] [drm] ring test on 5 succeeded in 2 usecs [16815.543213] [drm] UVD initialized successfully. [16815.543215] [drm] Enabling audio 0 support [16815.543314] [drm] ib test on ring 0 succeeded in 0 usecs [16815.543316] HDMI ATI/AMD: no speaker allocation for ELD [16815.543392] [drm] ib test on ring 3 succeeded in 1 usecs [16815.695326] [drm] ib test on ring 5 succeeded [16815.825465] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [16815.829661] ata2.00: configured for UDMA/100 [16815.841527] HDMI ATI/AMD: no speaker allocation for ELD [16816.141787] HDMI ATI/AMD: no speaker allocation for ELD [16816.442023] HDMI ATI/AMD: no speaker allocation for ELD [16816.742260] HDMI ATI/AMD: no speaker allocation for ELD [16816.954352] psmouse serio1: elantech: retrying ps2 command 0xe6 (2). [16817.042507] HDMI ATI/AMD: no speaker allocation for ELD [16817.342761] HDMI ATI/AMD: no speaker allocation for ELD [16817.469261] psmouse serio1: elantech: retrying ps2 command 0xf8 (2). [16817.506809] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [16817.514809] ata1.00: configured for UDMA/133 [16817.530902] sd 0:0:0:0: [sda] Starting disk [16817.579121] PM: resume of devices complete after 2247.991 msecs [16817.579331] PM: Finishing wakeup. [16817.579332] Restarting tasks ... done. [16817.642887] HDMI ATI/AMD: no speaker allocation for ELD [16817.943241] HDMI ATI/AMD: no speaker allocation for ELD [16818.175355] psmouse serio1: elantech: retrying ps2 command 0xf8 (1). [16818.455819] video LNXVIDEO:01: Restoring backlight state [16818.805212] init: anacron main process (20415) killed by TERM signal [16819.019324] tg3 0000:02:00.0: irq 46 for MSI/MSI-X [16819.031026] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [16819.076297] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [16820.822092] wlan0: authenticate with d8:67:d9:c2:d0:a0 [16820.849096] wlan0: send auth to d8:67:d9:c2:d0:a0 (try 1/3) [16820.853845] wlan0: authenticated [16820.857558] wlan0: associate with d8:67:d9:c2:d0:a0 (try 1/3) [16820.861319] wlan0: RX AssocResp from d8:67:d9:c2:d0:a0 (capab=0x411 status=0 aid=10) [16820.861372] wlan0: associated [16820.861384] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [16820.862499] cfg80211: Calling CRDA for country: US [16820.866506] ath: EEPROM regdomain: 0x8348 [16820.866511] ath: EEPROM indicates we should expect a country code [16820.866513] ath: doing EEPROM country->regdmn map search [16820.866515] ath: country maps to regdmn code: 0x3a [16820.866517] ath: Country alpha2 being used: US [16820.866518] ath: Regpair used: 0x3a [16820.866521] ath: regdomain 0x8348 dynamically updated by country IE [16820.866546] cfg80211: Regulatory domain changed to country: US [16820.866548] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [16820.866550] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [16820.866553] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [16820.866554] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16820.866556] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16820.866558] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16820.866560] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [16820.866562] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [16820.882686] wlan0: deauthenticating from d8:67:d9:c2:d0:a0 by local choice (reason=2) [16820.895623] cfg80211: Calling CRDA to update world regulatory domain [16820.896967] wlan0: authenticate with d8:67:d9:c2:d0:a0 [16820.916484] wlan0: send auth to d8:67:d9:c2:d0:a0 (try 1/3) [16820.916908] cfg80211: World regulatory domain updated: [16820.916920] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [16820.916928] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16820.916935] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16820.916940] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [16820.916945] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16820.916950] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16820.921333] wlan0: authenticated [16820.925568] wlan0: associate with d8:67:d9:c2:d0:a0 (try 1/3) [16820.929885] wlan0: RX AssocResp from d8:67:d9:c2:d0:a0 (capab=0x411 status=0 aid=10) [16820.929944] wlan0: associated [16820.930026] cfg80211: Calling CRDA for country: US [16820.933162] ath: EEPROM regdomain: 0x8348 [16820.933166] ath: EEPROM indicates we should expect a country code [16820.933169] ath: doing EEPROM country->regdmn map search [16820.933171] ath: country maps to regdmn code: 0x3a [16820.933173] ath: Country alpha2 being used: US [16820.933174] ath: Regpair used: 0x3a [16820.933176] ath: regdomain 0x8348 dynamically updated by country IE [16820.933202] cfg80211: Regulatory domain changed to country: US [16820.933204] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [16820.933206] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [16820.933208] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [16820.933210] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16820.933212] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16820.933214] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16820.933216] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [16820.933217] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [17495.198789] [sched_delayed] \x014CE: hpet increased min_delta_ns to 20115 nsec [17515.853406] usb 3-3: new full-speed USB device number 2 using ohci-pci [17516.030579] usb 3-3: New USB device found, idVendor=045e, idProduct=028e [17516.030586] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [17516.030589] usb 3-3: Product: Controller [17516.030592] usb 3-3: Manufacturer: \xffffffc2\xffffffa9\xffffffa9Microsoft Corporation [17516.030594] usb 3-3: SerialNumber: 2162D9B [17516.103789] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input14 [17516.106815] usbcore: registered new interface driver xpad [17519.781091] usb 3-3: USB disconnect, device number 2 [17616.643903] wlan0: authenticate with d8:67:d9:c2:d3:18 [17616.665004] wlan0: send auth to d8:67:d9:c2:d3:18 (try 1/3) [17616.665262] cfg80211: Calling CRDA to update world regulatory domain [17616.668712] wlan0: authenticated [17616.669781] wlan0: associate with d8:67:d9:c2:d3:18 (try 1/3) [17616.679578] wlan0: RX AssocResp from d8:67:d9:c2:d3:18 (capab=0x411 status=0 aid=4) [17616.679659] wlan0: associated [17616.763350] cfg80211: World regulatory domain updated: [17616.763355] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [17616.763359] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [17616.763361] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [17616.763363] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [17616.763365] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [17616.763367] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [17616.763736] cfg80211: Calling CRDA for country: US [17616.766417] ath: EEPROM regdomain: 0x8348 [17616.766421] ath: EEPROM indicates we should expect a country code [17616.766424] ath: doing EEPROM country->regdmn map search [17616.766426] ath: country maps to regdmn code: 0x3a [17616.766427] ath: Country alpha2 being used: US [17616.766429] ath: Regpair used: 0x3a [17616.766431] ath: regdomain 0x8348 dynamically updated by country IE [17616.766457] cfg80211: Regulatory domain changed to country: US [17616.766459] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [17616.766461] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [17616.766463] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [17616.766465] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [17616.766467] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [17616.766469] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [17616.766470] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [17616.766472] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [18142.807543] show_signal_msg: 123 callbacks suppressed [18142.807554] rviz[23963]: segfault at 3f800000 ip 3f800000 sp bfa76c6c error 14 in SYSV00000000 (deleted)[a281a000+fa000] [18217.146489] wlan0: authenticate with d8:67:d9:c2:d0:a0 [18217.165644] wlan0: send auth to d8:67:d9:c2:d0:a0 (try 1/3) [18217.165763] cfg80211: Calling CRDA to update world regulatory domain [18217.169805] wlan0: authenticated [18217.171360] wlan0: associate with d8:67:d9:c2:d0:a0 (try 1/3) [18217.171787] cfg80211: World regulatory domain updated: [18217.171792] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [18217.171794] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18217.171797] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18217.171799] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [18217.171801] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18217.171802] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18217.175336] wlan0: RX AssocResp from d8:67:d9:c2:d0:a0 (capab=0x411 status=0 aid=5) [18217.175399] wlan0: associated [18217.175708] cfg80211: Calling CRDA for country: US [18217.179545] ath: EEPROM regdomain: 0x8348 [18217.179550] ath: EEPROM indicates we should expect a country code [18217.179553] ath: doing EEPROM country->regdmn map search [18217.179555] ath: country maps to regdmn code: 0x3a [18217.179557] ath: Country alpha2 being used: US [18217.179559] ath: Regpair used: 0x3a [18217.179561] ath: regdomain 0x8348 dynamically updated by country IE [18217.179587] cfg80211: Regulatory domain changed to country: US [18217.179589] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [18217.179591] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [18217.179594] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [18217.179596] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18217.179598] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18217.179600] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18217.179602] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [18217.179604] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [18545.193209] type=1400 audit(1412184066.598:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=26205 comm="apparmor_parser" [18545.193225] type=1400 audit(1412184066.598:75): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=26205 comm="apparmor_parser" [18545.194058] type=1400 audit(1412184066.602:76): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=26205 comm="apparmor_parser"

Viewing all articles
Browse latest Browse all 475

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>